Showerhead Covered in Limescale and Spraying Erratically? Use This 30-Minute Trick to Restore It

A regular, thorough cleaning is all it takes to keep your showerhead sparkling and ready for action! However, despite our best efforts, limescale build-up can still occur, not just because it’s unsightly, but also because it can damage our showerhead. When small holes become clogged, it disrupts water flow and causes water to spray in all directions, turning a simple shower into an adventure. But fear not because we’ve got a fantastic solution! In just thirty minutes, you can get your showerhead as clean as new with our simple, effective trick!

The Problem: Clogged and Erratic Showerhead

Have you been cleaning your showerhead diligently, yet it’s still waterlogged? Are the tiny holes in the showerhead clogged, causing water to flow poorly or even splash around when you shower? Before you rush out to buy a new showerhead, try this cleaning trick. It takes just thirty minutes and will leave your showerhead looking as if you just bought it from the store! Best of all, it only requires a few common household items that you likely already have.

The Solution: Clean Your Showerhead in 30 Minutes

What You’ll Need:

• A plastic bag
• Vinegar

Instructions:

1. Prepare the Cleaning Solution: Half-fill the plastic bag with vinegar.
2. Soak the Showerhead: Place the showerhead inside the bag, ensuring that the areas with water holes are submerged in the vinegar. Tie the bag securely around the showerhead.
3. Wait: Let the showerhead soak in the vinegar for 30 minutes.
4. Scrub: After the time is up, scrub the small holes in the showerhead using the scrubbing side of a sponge or a toothbrush.
5. Rinse and Dry: Rinse the showerhead thoroughly with lukewarm water and wipe it dry with a clean cloth.

An Alternative: Baking Soda as a Substitute for Vinegar

If you don’t have vinegar on hand, baking soda is a great alternative.

What You’ll Need:

• A plastic bag
• Water
• Baking soda

Instructions:

1. Prepare the Cleaning Solution: Pour a cup of water into the plastic bag, then add a cup of baking soda.
2. Soak the Showerhead: Submerge the showerhead in the solution and let it soak for an hour.
3. Rinse: After soaking, rinse the showerhead thoroughly with hot water.

The Quick Combo Method

For an even quicker clean, you can combine both vinegar and baking soda.

What You’ll Need:

• Bicarbonate of soda (baking soda)
• Vinegar
• An old toothbrush

Instructions:

1. Apply Baking Soda: Sprinkle the showerhead with baking soda.
2. Scrub: Dip an old toothbrush in vinegar and scrub the showerhead thoroughly.
3. Rinse: Rinse the showerhead with water to reveal a sparkling clean surface.

By following these simple methods, you can easily remove limescale and other buildups from your showerhead, restoring its functionality and appearance. No need for expensive cleaners or a new showerhead—just a few household items and thirty minutes of your time!